5000 Series Solid Aluminiyam Round Rod

5000 Series eSolid Aluminium Round Rod Featured Umfanekiso

Inkcazelo emfutshane:

5000 series aluminiyam iintonga imele 5052, 5005, 5083, 5A05 series.Iintonga ze-5000 ze-aluminium ze-aluminiyam ezisetyenziswa ngokuxhaphakileyo, eyona nto iphambili yi-magnesium, kwaye umxholo we-magnesium uphakathi kwe-3-5%.Ikwabizwa ngokuba yi-aluminium-magnesium alloy.Iimpawu eziphambili kukuxinana okuphantsi, ukomelela okuphezulu kunye nobude obuphezulu.Ngaphantsi kwendawo enye, ubunzima be-aluminium-magnesium alloy buphantsi kunolunye uchungechunge, kwaye lusetyenziswa ngokubanzi kumashishini aqhelekileyo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ingcaciso yeMveliso

I-5052 intonga ye-aluminiyam yi-AL-Mg series, eyona nto isetyenziswa kakhulu i-aluminiyam echasene nomhlwa.Le alloy inamandla amakhulu, ngokukodwa ukuxhathisa ukukhathala: iplastiki ephezulu kunye nokuxhatshazwa kwe-corrosion, kwaye ayikwazi ukuqiniswa ngonyango lokushisa.Iplastiki elungileyo, iplastikhi ephantsi ngexesha lomsebenzi obandayo wokuqina, ukuxhathisa okulungileyo kokugqwala, ukushibilika okulungileyo, ukusebenza kakubi, kunye nokupolishwa.Iintsimbi ze-aluminium ze-5052 zisetyenziselwa ubukhulu becala kwiindawo ezinomthwalo ophantsi ezifuna iplastiki ephezulu kunye ne-weldability efanelekileyo, kwaye isebenze kwimithombo yamanzi okanye yegesi, njengebhokisi yeposi, i-petroli okanye i-oyile yokuthambisa, izitya ezahlukeneyo zolwelo kunye nezinye iindawo ezincinci ezenziwe ngomzobo onzulu.Amalungu alayishiweyo: Ucingo lusetyenziselwa ukwenza iirivets.Ikwasetyenziswa ngokuqhelekileyo kumacandelo entsimbi yeenqwelo zokuthutha kunye neenqanawa, izixhobo, izibiyeli zezibane zesitrato kunye ne-rivets, iimveliso ze-hardware, i-enclosures zombane, njl.

I-5083 intonga ye-aluminium ye-Al-Mg-Si i-alloy, esetyenziswa ngokubanzi, ngakumbi imboni yokwakha ayikwazi ukwenza ngaphandle kwale alloy, kwaye iyona nto ithembisayo.Ukumelana nokugqwesa okulungileyo, ukuwelda okugqwesileyo, ukusebenza kakuhle okubandayo, kunye nokomelela okuphakathi.Eyona nto iphambili ye-alloying ye-5083 yi-magnesium, enokwakheka kakuhle, ukumelana nokugqwala, ukuwelda, kunye namandla aphakathi.Iimveliso ze-Hardware, iindawo ezivaliweyo zombane, njl.

Ukubunjwa kweekhemikhali kunye neepropati zemishini ye-5052 intonga ye-aluminium

Al	Si	Cu	Mg	Zn	Mn	Cr	Fe
Isibonelelo	≤0.25	≤0.10	2.2~2.8	≤0.10	≤0.10	0.15-0.35	≤0.40

Amandla okuqina (σb)	170 ~ 305MPa
Amandla emveliso enemiqathango	σ0.2(MPa)≥65
Imodyuli yeelastiki (E)	69.3-70.7Gpa
Ubushushu be-Anealing	345°C.

Ukubunjwa kweekhemikhali kunye neepropati zemishini ye-5083 intonga ye-aluminium

Al	Si	Cu	Mg	Zn	Mn	Cr	Fe	Ti
Isibonelelo	0.4	0.1	4.0--4.9	0.25	0.40--0.10	0.05--0.25	0.4	0.15

Amandla okuqina σb (MPa)	110-136
Ubude δ10 (%)	≥20
Ubushushu be-Anealing	415°C.
Amandla esivuno σs (MPa)	≥110
Isamphawu yoMlinganiso ongenanto Bonke Ubutyeba beendonga
Ubude δ5 (%)	≥12